

Electrician required


Pendants · LK-PD-403
900 lm from a 40 cm cone. Hard-wired.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with a 9 W E27 bulb at 2700 K
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
An authorised electrician is required
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit a dimmable bulb and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 1,985
inkl. 25% moms · DKK 1,588 ekskl. moms · DKK 397 moms
About this one
A single fitting for a six-seat table. The 40 cm shade puts an even circle of about 150 cm across the table at standard hanging height, which is roughly the width of a place setting on both sides.
Cord length is 200 cm and can be shortened during installation.
Build
Original design
Others in Pendants


Electrician required


Electrician required


Electrician required
DKK 2,650inkl. moms