

Electrician required


Pendants · LK-PD-404
1,200 lm along 90 cm. Hard-wired, two fixing points.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, integrated module at full output
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
EU energy label under Regulation 2019/2015.
Marked on the product. It must not go in household waste — how to return it.
Installation
An authorised electrician is required
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Rated to L80B10 at 25 °C ambient. The LED cannot be changed: when it reaches end of life, the fitting has reached end of life with it.
Protection rating
Indoor, dry locations only
Dimming
Dimmable from a compatible trailing-edge wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 2,650
inkl. 25% moms · DKK 2,120 ekskl. moms · DKK 530 moms
About this one
A 90 cm extruded bar with a continuous diffuser, hung on two cables. Over a long table it does what three round pendants do, without three sets of holes in the ceiling.
It needs two ceiling fixings, not one. Confirm you have somewhere to put the second one before ordering.
Build
Original design
Others in Pendants


Electrician required


Electrician required


Electrician required