

Electrician required


Pendants · LK-PD-405
Three heads at 400 lm each, 1,200 lm together. Hard-wired.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with three 4.5 W E14 bulbs at 2700 K
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
An authorised electrician is required
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit dimmable bulbs and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 2,450
inkl. 25% moms · DKK 1,960 ekskl. moms · DKK 490 moms
About this one
Three cones on individually adjustable cords from a single ceiling plate. Set them at three heights and the cluster reads as one object; set them level and it reads as a row.
All three heads switch together from one circuit.
Build
Original design
Others in Pendants


Electrician required


Electrician required


Electrician required