

Electrician required


Wall Lights · LK-WL-302
400 lm on the wall, plugged into a socket. No electrician.
Photometric data
Supplier-declared, measured to EN 13032-1 at 25 °C ambient, with a 4.5 W E14 bulb at 2700 K
We hold no colour rendering test report for this article, so no figure is printed. We are not going to estimate one.
Assumes 2.4–2.6 m ceiling, light-coloured matt walls, and this fitting as the only light in that zone.
Electrical compliance
A copy is available on request from support@mazodesign.shop. Articles without a declaration reference are not offered for sale on this site.
This fitting contains no light source, so the energy label belongs to whichever bulb you fit.
Marked on the product. It must not go in household waste — how to return it.
Installation
No wiring work
Built for a 220–240 V / 50 Hz supply. A plug adapter changes the shape of the pins, not the voltage — we do not ship to 100–127 V markets, and the checkout blocks those destinations before you can submit an order.
Light source
You will need a bulb before this fitting will do anything. We sell them, and so does every supermarket.
This is a safety limit, not a brightness suggestion. Exceeding it risks overheating and fire.
Protection rating
Indoor, dry locations only
Dimming
Dimmable only if you fit a dimmable bulb and a wall dimmer.
Check your dimmer model before you order. Dimmer compatibility depends on the dimmer in your wall as much as on the fitting, and no one can guarantee it across every installation.
DKK 795
inkl. 25% moms · DKK 636 ekskl. moms · DKK 159 moms
About this one
A wall light with a 250 cm fabric cord and a plug on the end. It hangs on two screws and draws power from the nearest socket, which means you can put wall light in a rented flat without touching the wiring.
The cord is meant to be visible. There is a cleat in the box if you want to run it straight down the wall rather than let it drape.
Build
Original design
Others in Wall Lights


Electrician required


Electrician required


Electrician required
IP44